Control D Glucometer Blood Glucose Monitor With 25 Strips 1

Control D Glucometer Blood Glucose Monitor With 25 Strips 1 is used for monitoring blood sugar levels. It helps deliver results within five seconds, making the process quick and efficient. The device can store up to 500 past readings, allowing the user to keep track of their glucose levels over time. It requires only a tiny blood sample of 0.5 µl for monitoring.

• Five Second Test: The Control D Glucometer provides readings within just five seconds, allowing for a quick and efficient monitoring of blood glucose. 
   
• Ejection Button: An ejection button is provided for safely and hygienically removing the used test strip without direct contact. 
   
• 500 Memory: The device is capable of storing up to 500 test results, making it easier to track glucose levels and observe variations over time.
   
• Minimum Blood Sample: The device needs a small blood sample of 0.5 microlitres for testing, which minimises the need for deeper pricking. 
   
• No Coding: The glucometer eliminates the need for manual coding of strips before testing, which simplifies the process. 
   
• Fits in Pocket: Its compact and lightweight design makes the glucometer easy to carry, fitting neatly into a pocket or small pouch for convenient use. 

• Quick Testing: The five-second testing capability allows the user to check their blood glucose levels quickly. 
   
• Tracking Blood Glucose: Control D Glucometer has a memory capacity of 500 readings, which helps support consistent monitoring by storing previous values. 
   
• Comfortable Sampling Experience: The device requires only 0.5 µl of blood, which might reduce the discomfort that may occur with repeated testing. 
   
• Convenient for Travel: The pocket-sized build makes it easy to carry the Control D Glucometer wherever needed, whether at home, work, or while travelling. 
   
• Streamlined Testing Process: As there is no need for manual coding, the user can start testing immediately without the risk of calibration errors. 
   
• Hygienic Handling: The built-in ejection button allows safe removal of used test strips without touching them, maintaining a cleaner and more sanitary experience during multiple daily checks.

Battery Installation 

• Open the battery compartment given at the back of the meter & place the battery with the '+' symbol facing up.

Setting Up a Lancing Device 

• Remove the cap from the lancing device.
• Insert a new lancet firmly up to the bottom of the lancet holder.
• Twist & remove the protective cap of the lancet (Keep the cap aside, do not throw it).
• Place the cap back on the device. The cap must audibly click in its place.
• Adjust the depth required for pricking as per the thickness of the skin.
• Pull the plunger (on the end of the device) to load the device.

Monitoring Blood Glucose 

• Insert the strip into the meter strip slot with contact bars towards the meter and facing upwards.
• When the flashing blood drop symbol appears (in 2 seconds), the meter is ready to apply blood to the glucose test strip.
• Use your lancing device to obtain a blood drop. Hold it against the side of the fingers and press the release button to prick & obtain blood samples.
• Apply a blood drop to the sample at the end of the strip. 
• The blood is drawn into the sample area automatically. 
• Don't remove the meter from the sample until you hear a beep.
• The meter will start to count down from 5 to 1, and your blood test result will be displayed.
• After getting the result, press the strip ejector button near a dustbin so that the used strip gets released from the meter and falls into the dustbin.  
• Push the lancet needle into the protective cap and discard the lancet from the lancing device.

• Store the device in a cool and dry place, away from direct sunlight and moisture. 
• Always wash and dry your hands before testing to avoid contamination of the test strip or device. 
• Use only the compatible Control D test strips and ensure the strips are not expired or damaged. 
• Avoid sharing the device or strips with others to maintain hygiene. 
• Do not disassemble or modify the device, and handle the lancets and test strips with clean hands. 
• Used strips and lancets should be disposed of properly according to local regulations. 
• Keep the device out of reach of children and pets.